Quickly interchange trailers. The new Durite magnetic camera is easily mounted onto any point of your trailer and is compatible with the wider durite range, so you have the flexibility to record, live stream, and/or comply with FORS and Direct Vision Standard (DVS).

Crystal clear image: 700TVL 2.8mm lens.

Strong magnetic base to resist high speeds.

Protected to IP67/IP69K.

Vibration 10G.

Technical Specifications - Camera TX

Image sensor 1/3 inch Sharp CCD

Resolution 700TVL

Lens 2.8mm

Sync. system Internal

Viewing angle 120 degrees H, 95 degrees V

TV System PAL

Video output 1.0vp-p,75ohm AHD

RF working frequency 2.4-2.4835G

RF Modulation Mode QPSK MD301RE 16QAM MD301SE

Antenna Impedance 50ohm

Transmitted power 18dBm

Signal transmission distance 100Metres

Min illumination 0.1 Lux

Night vision distance Up to 8 Metres

Image mode Normal

Vibration 10G

IR LED light 20 LEDs

Power voltage 12VDC

Waterproof rating IP67 / IP69K

Voltage / Power 12V 1.2W, 24V 2.4W

Camera connector type 4 PIN Aviation *(See images for layout)

Operating temperature -30 degrees C ~ 70 degrees C, RH95% MAX

Storage temperature -30 degrees C ~ 75 degrees C, RH95% MAX

Dimensions Please see the image diagram

Certificate E Marked R10 EMC

WARNINGS

Before using this unit, please read these instructions carefully. Take special care to follow the warnings and safety suggestions listed below. Keep these instructions for future reference. There are no user-serviceable parts within the unit. Refer servicing to qualified service personnel.

PRECAUTIONS

• Please ensure you are familiar with and comply with local traffic and driving regulations.

• Connection - The camera should only be connected to a Durite CCTV system.

• Heat - Do not install the camera near heat sources.

• Mounting - Ensure the camera is facing the desired direction before fixing the camera base. If fixing to isolated return chassis, the camera bracket should be isolated from the vehicle chassis.

• Service - The user should not attempt to service these units beyond that described in these instructions. All other servicing should be referred to an authorised service technician.

GENERAL

The camera has a CCD image sensor, which gives a high-quality picture, and its solid-state circuitry provides an extremely long life. The compact size and single connection make it easy to install. Automatic gain control (AGC) provides a clear image in both strong sunlight and low light conditions. It is recommended that all camera lead connections are additionally sealed by wrapping them with suitable tape or applying heat shrink sleeving. Connecting the system and testing before fixing it is recommended to ensure the correct field of view is displayed.

OPERATION