Wireless Li-Ion Magnetic Reversing Camera with RX Box - 0-774-80
£491.67 | £590.00 inc VAT
Quickly interchange trailers. The new Durite magnetic camera is easily mounted onto any point of your trailer and is compatible with the more comprehensive Durite range, so you have the flexibility to record, live stream, and comply with FORS and Direct Vision Standard (DVS).
Crystal clear image: 700TVL 2.8mm lens.
Strong magnetic base to resist high speeds.
Protected to IP67/IP69K.
Vibration 10G.
Technical Specifications - Camera TX
Image sensor 1/3 inch Sharp CCD
Resolution 700TVL
Lens 2.8mm
Sync. system Internal
Viewing angle 120 degrees H, 95 degrees V
TV System PAL
Video output 1.0vp-p,75ohm AHD
RF working frequency 2.4-2.4835G
RF Modulation Mode QPSK MD301RE 16QAM MD301SE
Antenna Impedance 50ohm
Transmitted power 18dBm
Signal transmission distance 100Metres
Min illumination 0.1 Lux
Night vision distance Up to 8 Metres
Image mode Normal
Vibration 10G
IR LED light 20 LEDs
Power voltage 12VDC
Waterproof rating IP67 / IP69K
Voltage / Power 12V 1.2W, 24V 2.4W
Camera connector type 4 PIN Aviation *(See images for layout)
Operating temperature -30 degrees C ~ 70 degrees C, RH95% MAX
Storage temperature -30 degrees C ~ 75 degrees C, RH95% MAX
Dimensions Please see the image diagram
Certificate E Marked R10 EMC
Technical Specifications - Receiver RX
RF working frequency 2.4-2.4835G
RF Modulation Mode QPSK MD301RE 16QAM MD301SE/AV
Antenna Impedance 50ohm
Signal transmission distance 100M
Video signal format type CVBS
P/N system resolution 720x576 NTSC / 720x480 PAL
Video frame 30fps/25fps
Video Output 1.0vp-p 75ohm
Video SNR S/N 50dB
Audio Output 1.0±0.2Vp-p 10Kohm
Audio SNR S/N 58dB
Voltage input DC 12-24V
Power 2.4W
IP Rating IP67 / IP69K
Vibration 10G
Vibration 10G
Operating temperature -30 degrees C ~ 70 degrees C, RH95% MAX
Storage temperature -30 degrees C ~ 70 degrees C, RH95% MAX
Dimensions Please see the image diagram
Certificate E Marked R10 EMC
WARNINGS
Before using this unit, please read these instructions carefully. Take special care to follow the warnings and safety suggestions listed below. Keep these instructions for future reference. There are no user-serviceable parts within the unit. Refer servicing to qualified service personnel.
PRECAUTIONS
• Please ensure you are familiar with and comply with local traffic and driving regulations.
• Connection - The camera should only be connected to a Durite CCTV system.
• Heat - Do not install the camera near heat sources.
• Mounting - Ensure the camera is facing the desired direction before fixing the camera base. If fixing to isolated return chassis, the camera bracket should be isolated from the vehicle chassis.
• Service - The user should not attempt to service these units beyond that described in these instructions. All other servicing should be referred to an authorised service technician.
GENERAL
The camera has a CCD image sensor, which gives a high-quality picture, and its solid-state circuitry provides an extremely long life. The compact size and single connection make it easy to install. Automatic gain control (AGC) provides a clear image in both strong sunlight and low light conditions. It is recommended that all camera lead connections are additionally sealed by either wrapping them with suitable tape or applying heat shrink sleeving. Connecting the system and testing before fixing it is recommended to display the correct field of view.
OPERATION